Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Issue in Sub-interface traffic on cisco 7609-s router

Hello please support,

 

I configured sub-interfaces and it is working properly, but some time sub-interface show traffic more then physical interface .

Like 

int gi 3/32              0.13 Mbps  12:00 PM

int gi 3/32.11       855 Mbps   12:00 PM

as per my knowledge physical interface have cumulative traffic of all sub-interfaces. 

 

 

interface GigabitEthernet3/32
 no ip address
!
interface GigabitEthernet3/32.10
 encapsulation dot1Q 10
 ip address 172.20.128.77 255.255.255.252
 ip ospf network point-to-point
 ip ospf bfd
 bfd interval 50 min_rx 50 multiplier 5
 no bfd echo
 no cdp enable
!
interface GigabitEthernet3/32.11
 description interlink MPLS
 encapsulation dot1Q 11
 ip address 172.20.129.73 255.255.255.252
 ip ospf network point-to-point
 mpls ip
 mpls label protocol ldp
!

 

Regards,

Damodar Nagar

51
Views
0
Helpful
0
Replies