I know from an earlier thread that Cisco's position is symbolic link is not and will not be supported with /var/adm/CSCOpx, so my question is: What's the danger (if any) of manually re-establishing /var/adm/CSCOpx as a symlink to the real file system after "check_pkg_errors.sh -c" "fixes" this "error"?
I should qualify that there is no KNOWN danger besides the upgrade. Since, as you pointed out, this configuration is not supported nor tested, we don't have a full grasp of all possible problems that may exist.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...