Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Issue with Cisco 2912 XL

I am trying to import this device into Ciscoworks and I have verified the settings on the devices matches what I have in DCR.

I am using LMS 3.2 and when I perform a packet capture against the devices it appears not to be responding to snmp requests.

I am however able to collect inventory and archive backup on the server I have LMS 3.1 installed on.

It is anything I need to verify on the LMS 3.2 server like a package update or something to see whats wrong?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Issue with Cisco 2912 XL

I agree, it is not responding to SNMP requests.  It could be that you have an ACL configured on the community string which only permits the LMS 3.1 server.  Or, there may be a firewall in the network filtering udp/161 for all hosts except the LMS 3.1 server.

2 REPLIES
Cisco Employee

Re: Issue with Cisco 2912 XL

I agree, it is not responding to SNMP requests.  It could be that you have an ACL configured on the community string which only permits the LMS 3.1 server.  Or, there may be a firewall in the network filtering udp/161 for all hosts except the LMS 3.1 server.

New Member

Re: Issue with Cisco 2912 XL

Thanks I will check the firewall to see what is going on.

369
Views
0
Helpful
2
Replies