Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

KIWIW Syslog server

Is there anyway to set up the KIWI syslog server to only return data about certain ports? I want my syslog server only to tell me when a trunk link between switches go down. Right now it tells me when every port of every switch goues up/down.I have KIWI and are there any settings I can use to only log certain ports on the switch?

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Blue

Re: KIWIW Syslog server

Well, on paper, if kiwi syslog server lets you insert filtering between its receiving and notification subsystems, you could define your filtering criteria in a script: http://www.kiwisyslog.com/kb/how-to:-setup-script_based-complex-filters/

Or, you could disable "logging event link-status" globally on the switches, and selectively enable "logging event link-status" per interface. Similarly, there're also "logging event trunk-status", "logging event spanning-tree status", "logging event bundle-status", etc: http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/25sg/command/reference/int_sess.html#wp2089249

2 REPLIES
Blue

Re: KIWIW Syslog server

Well, on paper, if kiwi syslog server lets you insert filtering between its receiving and notification subsystems, you could define your filtering criteria in a script: http://www.kiwisyslog.com/kb/how-to:-setup-script_based-complex-filters/

Or, you could disable "logging event link-status" globally on the switches, and selectively enable "logging event link-status" per interface. Similarly, there're also "logging event trunk-status", "logging event spanning-tree status", "logging event bundle-status", etc: http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/25sg/command/reference/int_sess.html#wp2089249

New Member

Re: KIWIW Syslog server

This information and worked really well thank you.

Sent from Cisco Technical Support iPhone App

396
Views
0
Helpful
2
Replies
CreatePlease to create content