I'm using CisocWorks 2000 with Common services 2.2 with IDU 3.5. When I try to check the connectivity between LMS & my core switch (6500-E) through SNMP, it gets failed. But I'm getting syslog messages & also able to see the inventory of this switch. Besides this all other devices are accessible including 7609 routers. The Supervisor Engine version is same on both 6500 & 7600.
There is a firewall between the server & switch. I've opened the snmp ports on the firewall also.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...