LMS 2.5.1 SP4 "Devices for which Inventory has never been collected"

[AubreyBurt]

All of my AP's are showing up as "Devices for which Inventory has never been collected ". Why is this?

[nhabib]

It could be that they are not supported.

What is the sysObjectID of the AP's?

[AubreyBurt]

I have AP350's and AP1200's...

RFC1213-MIB::sysDescr.0 = STRING: "Cisco Internetwork Operating System Software ..IOS (tm) C350 Software (C350-K9W7-M), Version 12.2(13)JA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)..TAC Support: http://www.cisco.com/tac..Copyright (c) 1986-2003 by cisco Systems, Inc...Compiled Fri 14-Nov-0"

RFC1213-MIB::sysObjectID.0 = OID: CISCO-PRODUCTS-MIB::ciscoAirAp350IOS

RFC1213-MIB::sysDescr.0 = STRING: "Cisco Internetwork Operating System Software ..IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)..Technical Support: http://www.cisco.com/techsupport..Copyright (c) 1986-2004 by cisco Systems, Inc...Compi"

RFC1213-MIB::sysObjectID.0 = OID: CISCO-PRODUCTS-MIB::ciscoAIRAP1210

[nhabib]

Both ciscoAirAp350IOS (1.3.6.1.4.1.9.1.552) and ciscoAIRAP1210 (1.3.6.1.4.1.9.1.525) are supported in your version.

What error message (if any) do you get when you try to collect their inventory?

[AubreyBurt]

What error message (if any) do you get when you try to collect their inventory?

I am new to 2.5.1 and I do not see how to do this. I am also looking for Check Device Attributes.

[nhabib]

RME -> Devices -> Inventory -> Inventory Jobs -> Create

Select the AP's and run the job

[AubreyBurt]

when I go to: RME -> Devices -> Inventory -> Inventory Jobs -> it sends me to this URL:

http://X.X.X.X:1741/rme/ICSJobBrowser.do

but the page never loads.

[nhabib]

Looks like there are other issues to address then.

Sorry, not sure what could cause this.

[AubreyBurt]

i was able to run the collection and they all failed with one of the 3 reasons listed below.

-Device sensed, but collection failed

-Transport session to device failed. Cause: Authentication failed on device.

-Device Collection Failed

[ggolding]

I had a similar problem with 1200 aps. Upgraded the IOS to 123-4 & the inventory is now working.