Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LMS 2.5 configuration

Hi, i have ciscoworks2.5 LMS tool, is there any link or document available on net through which i can easily configure it on my windows server

  • Network Management
13 REPLIES
Cisco Employee
New Member

Re: LMS 2.5 configuration

Thanx for your help,

sorry i have no CCO login

so can i get it from any other link

Cisco Employee

Re: LMS 2.5 configuration

New Member

Re: LMS 2.5 configuration

again, i have no CCO login, how i can get this doc.

Now, what are the confg. change is required on managed router/switch in terms of SNMP support, protocol, syslog etc....

Cisco Employee

Re: LMS 2.5 configuration

Can you reach this link:

http://www.cisco.com/en/US/products/sw/cscowork/ps2425/products_quick_start09186a00805af28a.html

You need to enable snmp ro/rw on your devices to manage them in LMS. Also, you can setup other attributes like telnet, enable or tacacs authentication. Syslog would be enabled by the logging command

New Member

Re: LMS 2.5 configuration

yes, i can reach this link, Is there any config. difference between LMS 2.5 and LMS 2.5.1,

Is this link can help me fully to config. LMS 2.5 on windows server

Cisco Employee

Re: LMS 2.5 configuration

Hi,

LMS 2.5 and 2.5.1 are essentially the same. This guide should help you get LMS installed and walk you through setting it up to work.

New Member

Re: LMS 2.5 configuration

Hi, I am config. LMS 2.5 on window server, the 1st CD i have installed is Commom services, In Server-Admin-Process management is shows services,jrm, CMFOGSServer, CmfDbEngine, ESS, LicenceServer, Proxy, EDS-TR, RmeGatekeeper, RmeOrb, TomcatMonitor are (shows program started, no mgt. msgs received)

what is this ?

Cisco Employee

Re: LMS 2.5 configuration

These are LMS internal processes and from the status you are showing they are running fine.

149
Views
5
Helpful
13
Replies