Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 2.5 SP2 : User traking no working

I have a probleme with UT. I'm gone through several major and minor acquisitions and the DB still shows 0 end hosts. I've rebooted the server windows 2003. Both device discovery and campus collection are working.

Any ideas?


Andre Auvinet


Re: LMS 2.5 SP2 : User traking no working

This could be due to java file corruption. So we need to blow away the corrupt file and see whether this helped you out.

cd CSCOpx\lib\jrun\jsm-cw2000\services\jse\servlets Delete all files under this folder and start the UserTracking application again.

This should work.

Cisco Employee

Re: LMS 2.5 SP2 : User traking no working

Are you seeing all of your devices in Topology services?

you might want to clear out the UT or Campus Manager databases and start with a clean discovery with debug enabled

You can clear out UT db alone, but would recommend all of CM

from /CSCOpx/bin directory

perl -restore

Check the format of your discoverysnmp.conf to make sure it has the correct comm strings

Then enable debugs by Campus->Admin->Campus Data Collection->Debugging Options enable

the following modules: core,corex, vmpsadmin, framework, vlad

Run campus data collection and UT major acquisition

Then look at the ani.log and ut.log to see if shows any problems with the end hosts

-- you can grep for mac addresses that you think should be discovered or ip addresses of switches in topo services

CreatePlease to create content