Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

LMS 2.5 to manage devices outside of firewall

What ports do I need to manage devices outside of a firewall? We use logging, snmp, and telnet. What is the logging port? and are there any other ports that would need to be open?

1 REPLY
Cisco Employee

Re: LMS 2.5 to manage devices outside of firewall

Resource Manager Essentials should work as long as you have TFTP, Telnet and SNMP opened up on the firewall. Also, if you have TACACS you will need to open that as well.

The port for logging (syslog) us UDP 514.

Other ports that are used by Commmon Services can be found at this link:

http://www.cisco.com/warp/public/477/ports_oncd1.html

DFM uses the following ports and protocols.

Ports:

162

9000 (if port 162 is occupied)

9002

Protocols:

SNMP

ICMP

TCP/IP

SMTP

However, Campus Manager will be more difficult because of two issues:

-- It uses random ports over 1024

-- If there are firewalls between devices they will not show up properly because it maps the network through CDP. As CDP is layer two you can't open it on a firewall

104
Views
5
Helpful
1
Replies
CreatePlease to create content