Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 2.6 and CCM 5.x

Hello,

Awhile ago (last Dec.) there was a post by jclarke about the fact that the CCM ver 5.x does not have much of the support in LMS 2.6 (User - phone tracking in LMS Campus). I was wondering if anything has changed in this regard; from my attempts to get this going it seems like the problem (lack of support) is still there. Just maybe some one had a positive experience with that.

According to Cisco's admin guide for CCM 5.x it is the same MIB - Cisco-CCM-MIB (well, at least the name) and yet the LMS cannot see into CCM any farther than MIB2 and there is no info about the phones (descriptions, directory numbers, registration status) in the user tracking.

Thanks

7 REPLIES
Cisco Employee

Re: LMS 2.6 and CCM 5.x

What is the sysObjectID from this CCM? I will check on the current support ETA.

New Member

Re: LMS 2.6 and CCM 5.x

It is enterprises.9.1.584 or ciscoProducts.584

Thanks

Cisco Employee

Re: LMS 2.6 and CCM 5.x

There is still currently no plan to support this CCM. At this point you should open a TAC service request asking for support for this device. You should also ask your sales team to file a product enhancement request which will build a business case to support this MCS.

New Member

Re: LMS 2.6 and CCM 5.x

Thanks for info, will it be true for the other versions of CCM: 5.0.4, 5.1.2, the newer ver 6? I mean if the new feature (support) request is implemented by Cisco for 5.0.2 and later on this CCM is upgraded to 5.1.2 will the LMS still recognize this?

Cisco Employee

Re: LMS 2.6 and CCM 5.x

Hi Dmitry.

I'm wondering if something along the lines of CUOM (Cisco Unified Operations Manager) would meet your needs? Here, the supported device list:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/ipcom/devsuprt/omdvsp10.htm

which does indicate that indeed your call manager is supported, and here is the quick start guide which will give you a brief overview of its capabilities:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/ipcom/qsguide/icom1qsg.htm

(note, this is not the doc's to the newest version of the software, but should be a good place to start).

Hope this helps,

-Joe R.

Cisco Employee

Re: LMS 2.6 and CCM 5.x

As long as the sysObjectID doesn't change, and instrumentation remains the same, providing support for this CCM will mean support for later versions will be trivial if not automatic.

New Member

Re: LMS 2.6 and CCM 5.x

Thanks for the links, will give it a try

Regards

130
Views
0
Helpful
7
Replies