I assume you mean you will divide the network across both servers. That is, each instance of RME and Campus will manage no more than 5000 devices. If that is the case, then this hardware configuration will be fine. Just be sure you go with Windows 2003 Enterprise Edition to be able to take advantage of the 8 GB of RAM.
That's fine to do, but it's a bit of an overkill. Common Services by itself doesn't require much in the way of resources. It's only when you starting installing the applications does the memory and CPU requirements go up. If you are not dividing your network across these two servers, then you do not have a supported configuration. RME and Campus only support 5,000 devices each. Even if you had a firm 5,000, you would also not leave yourself any room to grow.
Correct. RME and Campus currently support 5,000 devices max. This is documented in the installation guide for both as well as in the LMS bundle documentation.
I recommend you leave yourself room to grow, so if possible split the 5,000 across two servers. This will, however, require two different licenses since you will need to install a copy of RME and Campus on both servers.
Common Services is unlicensed, so in your initial design, you would have only required one license. However, if you did get two licenses already, you will be okay to spread your network across the two servers with RME and Campus on both.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.