I am having LMS 2.6 and if I Sync Archive some jobs, it is failing for some 50% of devices. It is giving a error like
Execution Status : Job Execution Partially Successful for device
Execution Message : CM0061 PRIMARY RUNNING Config fetch SUCCESS for 10.237.1.11, no change in configuration.CM0057 VLAN RUNNING Config fetch SUCCESS, archival failed for 10.237.1.11 Cause: CM0012: Unable to create new version on archive $1 Action: Check if disk space is available and directory has required permissions Action: Verify that archive exists for device.
I have been working on a fix, but it is not something that can be easily described or handed out. There are basically two bugs involved here. The easiest workaround is to remove the problem device from RME, then re-add it. However, if you open a TAC Service Request, more analysis can be done.
Check the permissions on the directory. I was having same problem on sun box but was able to resolve after the permission was changed to read-write for the subdirectory where configs are to be stored. Looks like you may have disk space issue as well.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...