Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 2.6 - CM - filtering devices

we have got about 7000 devices in Ciscoworks LMS 2.6. In our last issue with inventory collection, TAC asked us to keep the device count to 5000. We intend to reduce the number from 7K to 5K now, but can we separately remove them from Campus manager while keeping them in DCR, DFM and RME or do i have to delete the devices manually from DCR?

are there any ways to configure filters for device discovery for the devices i want to include?

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: LMS 2.6 - CM - filtering devices

You can delete devices from Campus Manager directly using either the NMSROOT/campus/bin/DeleteDevice script or from Topology Services.

To only manage a certain set of devices in Campus, go to Campus Manager > Admin > Campus Data Collection > Data Collection Filters. For RME and DFM, you will have to disable auto-manage, then manually add the devices you want to mange (each application MUST manage less than 5000 devices).

Import filtering will get a lot better in LMS 3.1 due out in July.

2 REPLIES
Cisco Employee

Re: LMS 2.6 - CM - filtering devices

You can delete devices from Campus Manager directly using either the NMSROOT/campus/bin/DeleteDevice script or from Topology Services.

To only manage a certain set of devices in Campus, go to Campus Manager > Admin > Campus Data Collection > Data Collection Filters. For RME and DFM, you will have to disable auto-manage, then manually add the devices you want to mange (each application MUST manage less than 5000 devices).

Import filtering will get a lot better in LMS 3.1 due out in July.

New Member

Re: LMS 2.6 - CM - filtering devices

Thanks! You Rock Joe!!!

106
Views
0
Helpful
2
Replies