Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 2.6 - DCR Database - Device name and state problem

Hello

I have imported the devices im CW LMS 2.6 from a old 2.2 installation (via csv file)

For the CServices the devices are OK.

For the DCR the devices are in Questioned state.

Info:The DNS device name of devices is device.network.company.com

but the CW is just in company.com domain.

Into the DCR the devices appears with device. (with ".") name instead device.network.company.com.

I have correct the following data into the "CS Device and Credential" database:

- Add IP address

- Domain: network.company.com

And It seems the problem resolved.

DCR Question: Is this the only way to have the correct name (and Known state) into the DCR?

..I have 300 devices to modify..

Best Regards

Andrea

2 REPLIES
Blue

Re: LMS 2.6 - DCR Database - Device name and state problem

New Member

Re: LMS 2.6 - DCR Database - Device name and state problem

Hello

The problem was related to the missing IP parameter into the CS Devices Database.

I add the IP address and now is ok

For the name resolution into the DFM it was necessary do add the "ip domain-name" command into the devices. After that the name was correcty directy by the DFM.

Best Regards

Andrea

102
Views
0
Helpful
2
Replies