Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 2.6 DFM Errors DCRAdapter.log

When I open DFM Device Selector I get the following error. An exception has occurred. Please check the DCRAdapter.log file. I am trying to Check off "Synchronize with Device Credential Repository". I don't know why it is unchecked. Going through the other screens in DFM I get the same errors. I am running LMS 2.6 on Windows 2003 Server SP2 with all the latest package service packs.

I opened up a TAC case which was useless. I run the Cisco ACS agent on the same box and they wont support it until it is removed. It has run on this box together for years unil recently when this all blew up. I am about to the point of a reinstall.

Attached is the log. I see the network connection failure in the log but cant figure out what is failing and where.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: LMS 2.6 DFM Errors DCRAdapter.log

I found some details about ekrn.exe. It appears to be security-related, and it could be interfering with LMS. Can you disable this process, and restart CiscoWorks Daemon Manager?

7 REPLIES
Cisco Employee

Re: LMS 2.6 DFM Errors DCRAdapter.log

There may be a port conflict with this agent. Please post the output of pdshow.

New Member

Re: LMS 2.6 DFM Errors DCRAdapter.log

There is not a port conflict. The ACS agent uses ports 2000 - 2005 or something a long those lines. I can shut down the ACS service and LMS has the same issues. Attached is the PDShow

Cisco Employee

Re: LMS 2.6 DFM Errors DCRAdapter.log

Please post the output of netstat -a -n -o -b.

New Member

Re: LMS 2.6 DFM Errors DCRAdapter.log

Here you go..

Cisco Employee

Re: LMS 2.6 DFM Errors DCRAdapter.log

It looks like some of your daemons have either failed, or were never properly initialized. I'm also seeing this ekrn.exe process bound to a lot of CiscoWorks daemons. What is this?

Cisco Employee

Re: LMS 2.6 DFM Errors DCRAdapter.log

I found some details about ekrn.exe. It appears to be security-related, and it could be interfering with LMS. Can you disable this process, and restart CiscoWorks Daemon Manager?

New Member

Re: LMS 2.6 DFM Errors DCRAdapter.log

This is what I found based on your information. I checked into the ekrn.exe process which is NOD32. I just found out this application was installed a month or so ago. This was about the same time that LMS blew up. I stopped this service and LMS DFM no longer has any issues. Thank you for your help!

236
Views
0
Helpful
7
Replies
CreatePlease to create content