LMS 2.6 : few links are not showing in the topology map
I have installed LMS 2.6 and everything was going smoothly. Recently I have found a problem like that few links are not showing in the topology map although CDP is running and SNMP is configured properly. Please find the attachment for details.
Re: LMS 2.6 : few links are not showing in the topology map
It could be a bug in the CISCO-CDP-MIB on one of the devices, or it could be a bug in Campus Manager. I know of no bugs in CM 4.0.13 that would account for this. That is why I suggested you open a TAC service request so proper debugging can be done.
If you are desperate, you can try reinitializing the ANI database, then perform a new Campus Data Collection to see if that solves the problem, but I am doubtful considering the version of Campus:
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...