I looking for a report from LMS 2.6 fpr part numbers.I hang around RME custom template reports. Is there a list anywhere what describe the Inventory Group and Attribute in Details, or and has someone a suggestion how to get the part number report ?
The best thing to do is to run a Detailed Device Report for the device in question, and find the section which contains the information you want. For example, if you're looking for module part numbers, the module section is what you want. You can use this as a way of understanding what each Inventory Group can provide.
I think you'll want a custom report template like the following to get just about all possible part numbers:
I have done the custom report what you suggest. Just wondering a lot of fields are with N/A and this is why I'm not able to provide a report. The need is to send a report to smartnet with all cisco part number for maintenance. How can I do it, if some fields in Chassis Model Name some in Chassis Vendor Type etc. are set with N/A ?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...