Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

LMS 2.6, Product XXX is not registered with PSU.

CM, CS and DFM are not registered into PSU, so I'm not able to use Device & Software update.

Using CLI:

D:\psu_download>psucli -p cmf -install -src d:\psu_download Mdf

Error : Product cmf is not registered with PSU.

Valid and registered products:

rme ( Resource Manager Essentials )

How can I register a product?

Now, I'm trying to modify tag.properties file.

Thanks.

Andrea.

2 REPLIES
Cisco Employee

Re: LMS 2.6, Product XXX is not registered with PSU.

The products are The applications should be registered at install time. The tag.properties file should contain each application's short name and long name mapping, and that file would need to be edited for PSU to know what applications are installed. However, this is not something that should need to be done manually.

For a full LMS installation, tag.properties should look like:

cmf:CiscoWorks Common Services

cvw:CiscoView

nmim:Integration Utility

rme:Resource Manager Essentials

cm:Campus Manager

dfm:Device Fault Manager

ipm:Internetwork Performance Monitor

Once modified, dmgtd will need to be restarted. Additionally, you will need to make sure all of the .info files are in tact under NMSROOT/setup as PSU uses them as well.

New Member

Re: LMS 2.6, Product XXX is not registered with PSU.

Thanks.

I have installed CS, RME, CM and DFM and my tag file contains only the rme entry, so I have added all other applications.

Tomorrow I'll do a check for the .info files.

Thanks a lot.

Andrea.

161
Views
0
Helpful
2
Replies
CreatePlease to create content