Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LMS 2.6 support Cisco ACE Application Control Engine Module

Any idea when LMS 2.6 starts support Cisco ACE Application Control Engine Module. Now looks like it that i cant fetc config from that module. Also DFM cant manage that module.

Thanks

Juha

9 REPLIES
Cisco Employee

Re: LMS 2.6 support Cisco ACE Application Control Engine Module

ACE support for LMS 3.6 and 3.0 was only added in the latest round of device updates (in June and July). You will need to download the 2.0.9 Service Pack to get ACE support for DFM.

New Member

Re: LMS 2.6 support Cisco ACE Application Control Engine Module

My dfm version is 2.0.9 but still device discovery says UNKNOWN for ACE? I tryed to do rediscovery but same thing. Any idea what try next.

Juha

Cisco Employee

Re: LMS 2.6 support Cisco ACE Application Control Engine Module

What is the sysObjectID of the device?

New Member

Re: LMS 2.6 support Cisco ACE Application Control Engine Module

This is second row from snmpwalk. Is that what you mean.

.iso.3.6.1.2.1.1.2.0 = OID: .iso.3.6.1.4.1.9.1.730

juha

Cisco Employee

Re: LMS 2.6 support Cisco ACE Application Control Engine Module

Support for the ACE as a standalone device is not present. It can only be managed through the switch.

New Member

Re: LMS 2.6 support Cisco ACE Application Control Engine Module

Hi

Does that mean that it is not bossible to get backup from ACE's config itself. ACE boys starts again ask me is it possible. All context are needed to back up.

Thanks

Juha

Cisco Employee

Re: LMS 2.6 support Cisco ACE Application Control Engine Module

No, config and software management operations are not supported for this module in RME. It is only supported for inventory collection.

New Member

Re: LMS 2.6 support Cisco ACE Application Control Engine Module

Hi

Is that config backup possible later versions of RME.

thanks

Juha

Cisco Employee

Re: LMS 2.6 support Cisco ACE Application Control Engine Module

No, config management is not supported in any version of RME.

188
Views
0
Helpful
9
Replies