Original problem was logging on to web interface of LMS 2.6. I would get a memory error. After rebooting LMS server, the memory error went away. Now the problem we have is a security issue between LMS 2.6 and ACS 4.1.
On Common Services home page, in the Security pane, the Authorization Mode displays ACS in red.
You must make sure the ACS admin specified in LMS is NOT the appliance admin (if this is an ACS appliance). If you're creating a new admin user (a very good thing to do), make sure you've granted that user ALL RIGHTS under Administration Control.
Also, make sure you have opened up all ports for administration under Administration Control > Access Policy. This isn't strictly required if you're not doing application registration, but you will at least need 10 free TCP ports.
Finally, try logging in directly to ACS via the web with your admin user. Make sure this works.
I just changed the password in Administration Control > Username. Now, I am able to login to ACS via the web browser. We have made progress.
Yesterday, I only changed the password in User Setup and LMS AAA Mode Setup.
The ACS Connection Status in LMS now shows:
TACACS+ Connectivity With ACS Reachable
HTTP/HTTPs Connectivity With ACS Reachable
CiscoWorks System Identity User Configuation in ACS Not all privileges assigned
I was unable to effectively copy a screenshot of my administrator settings in ACS Administration Control, but I assure you that every box is checked except Account Locked. Editable groups shows all our ACS groups and Available groups is empty.
You need to create the System Identity User (found under Common Services > Server > Security > System Identity Setup) as a user in ACS. This user must be in a group which access to ALL tasks for ALL LMS applications. Since yiu are using LMS 2.6, you will need to create a new role for all of your LMS applications (e.g. a Super Admin role) which has all of the task boxes checked. Then, assign that role to each application in the System Identity User's ACS group. Then restart ACS.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.