We are running VSS on two 6509, device is present in DCR but although it is also present in CM 5.0.4 still its not recognized, listed as "ciscoProducts.896" under device type.Also I am not able to see both chassis in ciscoview & there is ? mark on icon in topology services. How to fix it.
VSS support is not available until Campus Manager 5.1, so you will need to upgrade to LMS 3.1 to get support for this device in Campus. For CiscoView, make sure you have Cat6000IOS package version 30.1, and the switch will be supported.
You can update your CiscoView packages under Common Services > Software Center > Device Update.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...