Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

LMS 3.0

Hi

I installed lms 3.0 on a windows server (2003 R2 x64 bit standard edition).

I can connect via browser to the homepage. Homepage looks ok. Selftest is ok.

Report about process status is not possible. get an empty browser. Campus topology get an error message, Aniserver down. License report get an license server down message.

What services are mandatory on windows 2003 server.

Any hints about my problem?

Thanks

HR

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: LMS 3.0

You need to upgrade to LMS 3.0.1 before you can get Windows 64-bit support. If ou have not already done this, you will need to uninstall LMS 3.0, and reinstall from scratch, then upgrade to 3.0.1 (you cannot use 3.0 on a 64-bit system). LMS 3.0.1 can be downloaded from http://www.cisco.com/cgi-bin/tablebuild.pl/lms301 .

1 REPLY
Cisco Employee

Re: LMS 3.0

You need to upgrade to LMS 3.0.1 before you can get Windows 64-bit support. If ou have not already done this, you will need to uninstall LMS 3.0, and reinstall from scratch, then upgrade to 3.0.1 (you cannot use 3.0 on a 64-bit system). LMS 3.0.1 can be downloaded from http://www.cisco.com/cgi-bin/tablebuild.pl/lms301 .

103
Views
0
Helpful
1
Replies