Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.1 Campus Manager 5.1.0 - ANIServer process trouble

No matter what i do i just cant seem to get the ANIServer process to run. I have even restored the campus manager DB.

Please please help. thank in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: LMS 3.1 Campus Manager 5.1.0 - ANIServer process trouble

The ANIServer.properties is completely corrupt. Copy NMSROOT/campus/etc/cwsi/ANIServer.properties.orig to ANIServer.properties. Then modify the file, and change the DEVICESROOT line to read:

DEVICESROOT=NMSROOT\\campus\\lib\\classpath

Where NMSROOT is the path into which LMS was installed (e.g. C:\\PROGRA~1\\CSCOpx). Also, change the AniName line to:

AniName=ANIServer6.0-boe-ciscoworks2

After that, ANIServer should start.

8 REPLIES
Cisco Employee

Re: LMS 3.1 Campus Manager 5.1.0 - ANIServer process trouble

Please post the ANIServer.log and the ani.log.

New Member

Re: LMS 3.1 Campus Manager 5.1.0 - ANIServer process trouble

Attached aniserver.log but the ani.log is 6mb so i have only attached the latest information which was in it.

thanks

Cisco Employee

Re: LMS 3.1 Campus Manager 5.1.0 - ANIServer process trouble

It appears you have a few problems. First, check the permissions on d:\PROGRA~1\CSCOpx\campus\etc\cwsi\ANIServer.properties. Make sure the casusers group has full control to this file, and all parent directories. Second, the ANI database appears to be down. Please post the output of the pdshow command.

New Member

Re: LMS 3.1 Campus Manager 5.1.0 - ANIServer process trouble

Thanks

The casuser has full rights to the file and all of the D: in fact

D:\Program Files\CSCOpx\campus>pdshow ANIServer

Process= ANIServer

State = Failed to run

Pid = 0

RC = -1

Signo = 1073741823

Start = N/A

Stop = 12/16/2008 4:25:57 PM

Core = Not applicable

Info = Application failed or was registered incorrectly.

Cisco Employee

Re: LMS 3.1 Campus Manager 5.1.0 - ANIServer process trouble

I wanted to see the entire pdshow output. Additionally, please post NMSROOT/campus/etc/cwsi/ANIServer.properties.

New Member

Re: LMS 3.1 Campus Manager 5.1.0 - ANIServer process trouble

Apologies please find attached

Cisco Employee

Re: LMS 3.1 Campus Manager 5.1.0 - ANIServer process trouble

The ANIServer.properties is completely corrupt. Copy NMSROOT/campus/etc/cwsi/ANIServer.properties.orig to ANIServer.properties. Then modify the file, and change the DEVICESROOT line to read:

DEVICESROOT=NMSROOT\\campus\\lib\\classpath

Where NMSROOT is the path into which LMS was installed (e.g. C:\\PROGRA~1\\CSCOpx). Also, change the AniName line to:

AniName=ANIServer6.0-boe-ciscoworks2

After that, ANIServer should start.

New Member

Re: LMS 3.1 Campus Manager 5.1.0 - ANIServer process trouble

much appreciation, your a genius :)

196
Views
0
Helpful
8
Replies