Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.1 & CUCM Cluster

Hi,

Does any one have a method by which to get my CUCM Servers registared to LMS so I can see Phone numbers.

I have the Servers Registared fine but can not see the CUCM Cluster I have seen other Conversions mention.

Thanks

Ian

2 REPLIES
Cisco Employee

Re: LMS 3.1 & CUCM Cluster

In order for Campus Manager to manage CCMs, they must first have the SNMP service enabled. Next, if the CCMS are running 5.x or higher code, you will need to upgrade to Campus Manager 5.1.1 before they will be supported. Then, add the CCMs to DCR with the appropriate SNMP read-only community string. When all the CCMs are added to DCR, then run a new Campus Data Collection. They should then appear as green Application Service icons on the Campus Topology Map. Once that is happening, you can run a User Tracking acquisition, and the phones will show up in User Tracking.

New Member

Re: LMS 3.1 & CUCM Cluster

Hi,

Thanks for the info, I had all the pre-req's.

But did not have the SNMP Service started on the CUCM's, although I had updated the SNMP infor and the system reported it was restarting the SNMP Service.

Now seeing all the Phone info.

Thanks

124
Views
0
Helpful
2
Replies