Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

LMS 3.1/ Dynamic UT

Heelo dear all.

Does anybody has already use the Dynamic UT in LMS 3.1 ?

The value entered seems having no impact under the results in the report.

The traps are well sending to the LMS from the Switch .The machuic log confirm this:

2009/10/08 11:44:03 pool-1-thread-1 macuhic INFO MacUhicDBTransaction: No data in the MAC notification entry.getMacEventSize() is 0

Decoder Stage: deviceIP : xxx.yyy.168.228 timeStamp : 200237633 Processed : true

5 REPLIES
Cisco Employee

Re: LMS 3.1/ Dynamic UT

Dynamic UT works fine for me. What version of Campus Manager do you have? On what switch types have you configured MAC address notification traps?

New Member

Re: LMS 3.1/ Dynamic UT

The version of the Campus Manager is a 5.1.3 one.

The switchs used are 3750 and 6500 series.

The version is a 12(2) one for both , i think, but i will precise that.

Cisco Employee

Re: LMS 3.1/ Dynamic UT

I know of no issues with dynamic UT in CM 5.1.3 that would account for MACUHIC ignoring traps for these switch types. I suggest you open a TAC service request, so that tracing can be enabled on the MACUHIC process, and these traps can be analyzed.

New Member

Re: LMS 3.1/ Dynamic UT

The switchs identity's are:

- IOS 12.1(22)EA11 / WS-C2950G-48-EI

- IOS 12.2(44)SE1 /WS-C3750-48PS-S

They have been chosen for doing the tests.

Do you have this kind of switchs installed of your LMS lab's ?

I mean that maybe we have forgotten to set some value under the switch themselves.Please see the configuration set for the SNMP part, that i have posted.

Cisco Employee

Re: LMS 3.1/ Dynamic UT

This config looks okay. As I said, you should open a TAC service request so the required tracing can be performed.

171
Views
0
Helpful
5
Replies
CreatePlease to create content