Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.1 Installation on Solaris

I finished installing LMS 3.1 on a Solaris box. Installation went smooth. I cannot access the web interface of LMS 3.1 using the 1741(http) or 443 (https) ports. Following is the end message:

=================================================================

===================- Possible Warnings/Errors Encountered -===================

WARNING: Ensure that you have installed the recommended Solaris 10 cluster patch es released

WARNING: on Apr/17/07, in this server.

WARNING: If these cluster patches are not installed, please download and install them

WARNING: from http://www.sun.com/.

WARNING: Otherwise, some features of the CiscoWorks applications will not functi on properly.

WARNING: Exiting installation beyond this point might result in system instabili ty.

WARNING: '/etc/inetd.conf' already contains an entry for tftp server.

WARNING: To ensure that you retain the latest device support,

WARNING: please install the latest Device Packages from Cisco.com @

WARNING: http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme

WARNING: Please refer to the Installation and Setup Guide for details.

WARNING: To ensure that you retain the latest device support and bug fixes, plea se install

WARNING: the latest Service Pack (SP) for Campus Manager 5.1

WARNING: You can download the latest SP from Cisco.com, at http://www.cisco.com/ cgi-bin/tablebuild.pl/cw2000-campus.

WARNING: Please refer to the Installation and Setup Guide for details.

WARNING: User Tracking Utility 1.0 is not compatible with Campus Manager 5.1

WARNING: User Tracking Utility 1.1.1 is available for Campus Manager 5.1

WARNING: You can download the latest UTU from Cisco.com, at http://www.cisco.com /cgi-bin/tablebuild.pl/cw2000-campus-crypto.

WARNING: Neither HP-OpenView or NetView is installed.

WARNING: To ensure that you have up-to-date device support,

WARNING: install the latest Service Pack (SP) from Cisco.com, at

WARNING: http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-dfm.

WARNING: For installation details, refer to the DFM Installation and Setup Guide

=====================================================================

How can I verify installation after LMS 3.1 finishes installing on Solaris? and How can I start stop services after I am not able to get to the web interface of LMS 3.1 after installation?

Follwing is my server specs:

Solaris 10 10/08 s10s_u6wos_07b SPARC

Patch cluster as of 2009-03-09 has been

Memory size: 16256 Megabytes

CPU - SUNW,UltraSPARC-T2

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: LMS 3.1 Installation on Solaris

Yes, you must install as root. But regardless, you need to make sure the permissions of the underlying NMSROOT file system mount point are 0755. If this is not the case, LMS will fail to run.

8 REPLIES
Cisco Employee

Re: LMS 3.1 Installation on Solaris

You need to reboot before using LMS as /etc/system gets changed.

When the server reboots, /etc/rc3.d/S10dmgtd should be executed automatically (yeah, we're not using svcadm yet). That should start Apache and Tomcat. After about 30 minutes, everything within LMS should be reachable.

If not, post the output of /opt/CSCOpx/bin/pdshow.

New Member

Re: LMS 3.1 Installation on Solaris

We restarted the server 9/18/09 around 9 am.

Cisco Employee

Re: LMS 3.1 Installation on Solaris

Please post the daemons.log.

New Member

Re: LMS 3.1 Installation on Solaris

daemons.log

Cisco Employee

Re: LMS 3.1 Installation on Solaris

There is a clear permissions problem here. And I think I know where. Unmount the file system which holds /opt/CSCOpx (or where ever the actual NMSROOT is). Make sure the permissions on the mount point are 0755.

For example, if /opt/CSCOpx is mounted on /opt (i.e. /opt is a file system), unmount /opt:

umount /opt

And look at the permissions on /opt:

ls -ld /opt

They need to be:

drwxr-xr-x root other ...

New Member

Re: LMS 3.1 Installation on Solaris

I am thinking of rebuilding the server and reinstalling LMS 3.1. When I install LMS 3.1, should I install it as Root?

Cisco Employee

Re: LMS 3.1 Installation on Solaris

Yes, you must install as root. But regardless, you need to make sure the permissions of the underlying NMSROOT file system mount point are 0755. If this is not the case, LMS will fail to run.

New Member

Re: LMS 3.1 Installation on Solaris

That worked. Thank you for your time sir.

168
Views
5
Helpful
8
Replies