Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

LMS 3.1 IPM Alert sent to syslog

We have LMS 3.1 installed and configure IPM threshold setting on rtt.Now it notifies violation to LMS server on IPM screen whenever there is any violation occur but at the same time i want my switch will send the same trap to my third party syslog server.Please let me know which are the additional command and additional required to do in switch?

2 REPLIES
Cisco Employee

Re: LMS 3.1 IPM Alert sent to syslog

Trap or syslog? If syslog, you need to enable:

ip sla logging traps

If SNMP traps, then you need to make sure you have ip sla (or rtr) traps enabled for your trap host:

snmp-server enable traps ipsla

snmp-server host 10.1.1.1 traps public ipsla

New Member

Re: LMS 3.1 IPM Alert sent to syslog

Thanks jClarke

your advice resolve my issue.i want to enable traps on switch.now i will able to get ip sla traps on my syslog server.

thanks once again...

158
Views
0
Helpful
2
Replies
CreatePlease to create content