10-08-2008 10:17 AM
I have installed a LMS 3.1 in multiserver environment with ACS integration.
Primary server has got most of the modules installed where as Slave has got just CS and DFM modules.
The devices has been discovered and showing perfect on primary where as I can't see the devices in secondary box ( In DFM). The DCR is running fine in both of the server.
any thought ??
10-08-2008 10:29 AM
Are both servers integrated to the same ACS server? Are they both using the same System Identity User?
10-08-2008 12:51 PM
That's right.
They are using same ACS and same system identity user.
10-08-2008 12:53 PM
Check the Common Services homepage on the slave server to see if the devices are being synced from the master DCR. By default, DFM 3.1 does not automatically manage devices in DCR, so it may be a simple matter of going to DFM > Device Management > Device Import, and adding the devices from DCR.
10-31-2008 08:58 AM
I have tried to import the devices in DFM but it's not showing any devices there too.
10-31-2008 09:25 AM
Does this mean that the slave's Common Services homepage is not showing any devices as well?
10-31-2008 10:03 AM
common services on svale server is showing the devices. But on the DFM we can see those devices.
I have only 2 devices in DFM. If I got to import then it shows 0 devices.
10-31-2008 10:49 AM
I don't understand what you're seeing. Please post some screenshots illustrating the problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide