Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.1, Nexus 7010, "Associated Router"

We are in the process of replacing our core routers with 2 pairs of Nexus 7010 (running version 4.2.3) devices, that have been running in parallel to the existing infrastructure for a while.

While looking in CiscoWorks LMS user tracking, we see end hosts associated with other routers but none with these two pairs.

Since the "associated routers" are where CM gets the ARP information on the hosts, I have a few questions.

First, is Nexus supported in this concern? I looked at the supported device table (http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.1/device_support/table/lms31sdt.html#3.0.1-7), it has an "N/A" in the "User Tracking" column, which doesn't seem to answer my question here.

Second, if this is supported, are there anything special that one has to do or to configure LMS to make it work? I did check the 2 pairs of devices and they are managed by CM.

Thanks!

--

Wei Wang

3 REPLIES
Cisco Employee

Re: LMS 3.1, Nexus 7010, "Associated Router"

The Nexus devices are managed as storage switches currently by Campus Manager.  Therefore, they will not be used to collect ARP information.  The Nexus is supported by Campus Manager, but not by User Tracking right now.  Support is planned for LMS 4.0 due out in July of this year.

--

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com

New Member

Re: LMS 3.1, Nexus 7010, "Associated Router"

Is it also planned to bring Nexus 7k UT support to LMS3.x via CM device package update or CM service pack?

We have this problem with LMS3.2 as well.

Steffen

Cisco Employee

Re: LMS 3.1, Nexus 7010, "Associated Router"

At this point, we still need instrumentation on the Nexus to enable UT support.  When this is done, LMS can be updated.  I have not heard of any plans to add this support to LMS 3.2, but that does not mean it will not happen.

841
Views
0
Helpful
3
Replies
CreatePlease login to create content