Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

LMS 3.1 not archiving device configurations

Hi,

I've installed LMS 3.1 on two Windows 2003 servers. In both cases, the LMS servers is not archiving the configurations from the majority of the devices (~600).

I've verified (via a credential verification report) that these devices are reachable from both test LMS servers. One of the test servers is in the same subnet as our production server.

Our Production LMS 3.01 server has no issues with the archives.

Any ideas?

Regards,

Doug

3 REPLIES
Cisco Employee

Re: LMS 3.1 not archiving device configurations

What errors are you seeing trying to archive the configurations?

New Member

Re: LMS 3.1 not archiving device configurations

Hi Joe,

This is resolved.

It appears to be an issue with the IP NAME-SERVER and the IP DOMAIN commands.

All of the devices are in a different domain than the LMS server. If I put the devices in the correct domain they archive fine.

Has this changed since LMS3.01. I have no problems with the archiving there.

Doug

Cisco Employee

Re: LMS 3.1 not archiving device configurations

I know of no such problems. Without actual error messages, though, it's impossible to offer a diagnosis.

119
Views
0
Helpful
3
Replies
CreatePlease to create content