Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LMS 3.1 on System Hardening

Could be LMS 3.1 installed on a System Hardening? We are getting many issue after that we have installed the LMS 3.1 on System hardening. Is there any special procedure to install the LMS 3.1 on Solaris 10 System hardening?

Thanks for your responses

4 REPLIES
Cisco Employee

Re: LMS 3.1 on System Hardening

LMS is not tested with a hardened Solaris OS. We have no documented procedures to do it.

New Member

Re: LMS 3.1 on System Hardening

hello jclarke,

thanks for your support

Hall of Fame Super Silver

Re: LMS 3.1 on System Hardening

While not a strictly "supported" installation, it is possible to harden a Solaris host that has CiscoWorks LMS installed on it.

You need to pay careful attention to the ports required by CiscoWorks and make sure that your hardening has not blocked the ports or their associated applications from communicating. See http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1108769 for details.

Hall of Fame Super Silver

Re: LMS 3.1 on System Hardening

Addendum:

A team I worked with successfully adapted a hardened Solaris 9 installation using the United States National Security Agency (NSA) hardening guidelines posted here:

http://www.nsa.gov/ia/guidance/security_configuration_guides/operating_systems.shtml#sun_solaris

and, more specifically, here:

http://www.nsa.gov/ia/_files/os/sunsol_9/I331-007R-2004.pdf

160
Views
0
Helpful
4
Replies