get anyone some output for the "reclaim unused up/down access port report" ?? I alway get the message "No records found for this report". We have some switches with such port where we expected a report for unused ports
In order for this report to return results, you must have ports in your network which are currently unused, but had a user connected to them at one point. For example, say you're running the Reclaim Unused Up report for 30 days. In order to get results, you need to have ports with are administratively up, but unconnected. At least 31 days ago, a user must have been connected to this port, and User Tracking must have seen that user.
One of the big problems with this report is that the default UT aging timer is 30 days. So unless you've raised this, you will not be able to see results for long time periods. The best you could do would be 29 days.
i have a user connected to a cisco 3750. user tracking has discovered this user last friday morning. in the evening i have disconnected this client. Today i have checked the reclaim unused port report and get no output.
Unused Down requires that the port be administratively down. If this is not the case, try the Unused Up report. If the user was last seen on Friday, and is showing up in UT with a last seen date of Friday, then run the Unused Up report for two days ago.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...