Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

LMS 3.1 supported device

I have Firewall Service Module(FWSM)3.1 is installed in Cisco 7613 Router, I just wanted to know if FWSM is supported by LMS 3.1 or not.

I have one more SAMI card is installed which I am using as PDSN IOS ver c7svcsami-c6ik9s-mz.124-22.XR.bin. Is this PDSN supported by LMS 3.1.

Hall of Fame Super Silver

Re: LMS 3.1 supported device

Reference the supported devices tables for LMS 3.1:

If your FWSM reports as snmp OID (which it probably does - as does the FWSM in a 65xx chassis), it is supported by the RME component of CiscoWorks only.

In general, all the Cisco firewalls have limited CiscoWorks functionality/support. See the following FAQ section for FWSM management options: Note that, in addition to the tools cited in that document, ASDM can also be used to manage a given firewall.

The same table I cited above notes that the SAMI (assuming it's OID is supported across the CiscoWorks LMS applications.

One can use snmpwalk to ascertain a given device's OID.

CreatePlease to create content