LMS 3.1 Syslog Automated Action - How to pass variables to script?
I would like to pass variables to a windows bat file for processing. The help seems to suggest that there are 2 available, device and message. I would like to know how to reference them and what syntax to use to pass them to the batch file. Are Facility, Sub-facility, Severity, Mnemonic and Description also availble? If so, how would they be referenced? Thanks in advance.
Re: LMS 3.1 Syslog Automated Action - How to pass variables to s
The syntax for referencing these variables is discussed in the online help. Essentially, you'll want to use %~1 and %~2 in your batch script to get the device and message respectively. The message will be the full message, so you will need to do additional processing on that to extract the facility, severity, and mnemonic.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...