Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.2 and ACS 5.1 authentication issues

Hi all,

Installed LMS 3.2 (running Common Services 3.3.0) and i'm having problems authenticating. I get the error :-

-Tacacs+ Connectivity - Reachable
-HTTP/HTTPS Connectivity - Not Reachable...Protocol mismatch detected.

AAA client - Not Applicable

Secret Key Verification - Not Applicable

System Identity User - Not Applicable


Note Verification failed for ACS server. Please check your settings.

Ive tried both http and https with the same result. Now i understand that integration as we know it is no longer supported but still having issues with authentication which should work. See links to other threads below. Any suggestions welcome.

Regards


https://supportforums.cisco.com/message/675371#675371

https://supportforums.cisco.com/message/3106459

1 REPLY
Cisco Employee

Re: LMS 3.2 and ACS 5.1 authentication issues

LMS cannot integrate with ACS 5.x.  You must set the AAA mode to local, then you can configure the TACACS+ login module to do authentication only with the ACS 5.x server.  This will not get you customer roles nor device level access, but you can at least centralize your user credentials on the ACS server.

589
Views
0
Helpful
1
Replies