I am using LMS 3.2 and Device Discovery never finishes. It discoevers the majority of devices and then hangs. The only way to stop it is to run pdterm CSDiscovery from the server command line. I used to have exactly this problem under LMS 3.1 and was advised it was a bug and 3.2 would fix it. Discovery has run ok under 3.2 for 6 months but is no longer working.
The problem appears to occur due to a bug. A message is printed to the logs with the group attributes. If enough devices are discovered, the size of this message overflows the log. The message appears to have been left in during some pre-release debugging. The message could be removed from the code to prevent the overflow.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...