Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx series

Hello Dears all,

a DDV report has send a unknown status while the package has been loaded on both kind of routers.

- 4506

- 4507r

The status has reported is "Other" . I have attached the snapshot . It concerns Fan and Power Supply.

The test made , is , as the Power supply are implemented with redundancy, to power off one of the both.

I have made him  a snmp walk on equipements, for get the exact mib description.

1.3.6.1.4.1.9.1.876 and .502 have been  supported. The device package is the Cat4000IOS version 7.2

My end user has experimented this default on anothers machines.

Does the bug CSCsz77616 can be applied for that ?

Is the DDV.Log and Interact.log could be shows us something ?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

EMC is the vendor who writes the polling engine for DFM.  We OEM the Smarts InCharge engine as the underlying components of DFM.

13 REPLIES
Cisco Employee

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

Device packages and sysObjectIDs don;t have any bearing on this issue.  DFM is reporting that the status of this PS is "OTHER" which is most likely what is getting reported by the device.  Post an SNMP Walk of the ciscoEnvMonMIB branch.

New Member

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

Hello, Joe

The SNMP walk has been launched.

On a 4506 type:

SNMP Walk Output
--------------------------------------------------------------------------------
.1.3.6.1.4.1.9.9.13

CISCO-ENVMON-MIB::ciscoEnvMonPresent.0 = INTEGER: cat4000(9)
CISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusDescr.1 = STRING: Chassis Temperature Sensor
CISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusValue.1 = Gauge32: 36 degrees Celsius
CISCO-ENVMON-MIB::ciscoEnvMonTemperatureThreshold.1 = INTEGER: 95 degrees Celsius
CISCO-ENVMON-MIB::ciscoEnvMonTemperatureLastShutdown.1 = INTEGER: 0 degrees Celsius
CISCO-ENVMON-MIB::ciscoEnvMonTemperatureState.1 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr.1 = STRING: Chassis Fan Tray 1
CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr.2 = STRING: Power Supply 1 Fan
CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr.3 = STRING: Power Supply 2 Fan
CISCO-ENVMON-MIB::ciscoEnvMonFanState.1 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonFanState.2 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonFanState.3 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusDescr.1 = STRING: Power Supply 1
CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusDescr.2 = STRING: Power Supply 2
CISCO-ENVMON-MIB::ciscoEnvMonSupplyState.1 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonSupplyState.2 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonSupplySource.1 = INTEGER: ac(2)
CISCO-ENVMON-MIB::ciscoEnvMonSupplySource.2 = INTEGER: ac(2)
CISCO-ENVMON-MIB::ciscoEnvMonAlarmContacts.0 = BITS: 00
CISCO-ENVMON-MIB::ciscoEnvMonEnableShutdownNotification.0 = INTEGER: false(2)
CISCO-ENVMON-MIB::ciscoEnvMonEnableTemperatureNotification.0 = INTEGER: false(2)
CISCO-ENVMON-MIB::ciscoEnvMonEnableFanNotification.0 = INTEGER: false(2)
CISCO-ENVMON-MIB::ciscoEnvMonEnableRedundantSupplyNotification.0 = INTEGER: false(2)
CISCO-ENVMON-MIB::ciscoEnvMonEnableStatChangeNotif.0 = INTEGER: false(2)

On 4507R-E equipement

The following is a SNMP walk of device 172.xx.xx.xx starting from .1.3.6.1.4.1.9.9.13

SNMP Walk Output
--------------------------------------------------------------------------------
.1.3.6.1.4.1.9.9.13

CISCO-ENVMON-MIB::ciscoEnvMonPresent.0 = INTEGER: cat4000(9)
CISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusDescr.21 = STRING: Chassis Temperature Sensor
CISCO-ENVMON-MIB::ciscoEnvMonTemperatureStatusValue.21 = Gauge32: 35 degrees Celsius
CISCO-ENVMON-MIB::ciscoEnvMonTemperatureThreshold.21 = INTEGER: 95 degrees Celsius
CISCO-ENVMON-MIB::ciscoEnvMonTemperatureLastShutdown.21 = INTEGER: 0 degrees Celsius
CISCO-ENVMON-MIB::ciscoEnvMonTemperatureState.21 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr.1 = STRING: Chassis Fan Tray 1
CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr.2 = STRING: Power Supply 1 Fan
CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr.3 = STRING: Power Supply 2 Fan
CISCO-ENVMON-MIB::ciscoEnvMonFanState.1 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonFanState.2 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonFanState.3 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusDescr.1 = STRING: Power Supply 1
CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusDescr.2 = STRING: Power Supply 2
CISCO-ENVMON-MIB::ciscoEnvMonSupplyState.1 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonSupplyState.2 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonSupplySource.1 = INTEGER: ac(2)
CISCO-ENVMON-MIB::ciscoEnvMonSupplySource.2 = INTEGER: ac(2)
CISCO-ENVMON-MIB::ciscoEnvMonAlarmContacts.0 = BITS: 00
CISCO-ENVMON-MIB::ciscoEnvMonEnableShutdownNotification.0 = INTEGER: false(2)
CISCO-ENVMON-MIB::ciscoEnvMonEnableTemperatureNotification.0 = INTEGER: false(2)
CISCO-ENVMON-MIB::ciscoEnvMonEnableFanNotification.0 = INTEGER: false(2)
CISCO-ENVMON-MIB::ciscoEnvMonEnableRedundantSupplyNotification.0 = INTEGER: false(2)
CISCO-ENVMON-MIB::ciscoEnvMonEnableStatChangeNotif.0 = INTEGER: false(2)

Thanks

Richard

Cisco Employee

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

This looks okay, but I see no evidence that these SNMP walks line up with the device being shown in DFM.

Start a sniffer trace filtering on SNMP traffic to this same switch seen in the posted DDV screenshot.  Let it run for eight minutes.  Stop the trace, then post the capture file.

New Member

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

Please see after the both snmp trace :

  • from the power supply when she is ok
  • from "       "         "      "       she isn't

An oid has been sending back with ( an 2ND trace)

name: 1.3.6.1.4.1.9.9.13.1.5.1.3.2 (SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.2)

with this value :

Value: INTEGER: 6

What is these value ?

Cisco Employee

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

The object in question is ciscoEnvMonSupplyState, and a value of 6 indicates the PS is not functioning.  It may be that DFM doesn't have the latest information about he allowed values of this object, so it displays OTHER instead of a more specific fault condition.

New Member

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

Thanks Joe for the last information .

Should i open a case to the TAC for having at least a view of the DFM code ?

I think that it will be the best for having maybe a patch.

The problematic is that my end user can't launch snmp debug on the equipement as it's an heart of network.

Richard

Cisco Employee

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

Yes, a service request should be opened.  The problem does not appear to be with the Cisco code in DFM, but rather with the underlying EMC engine.

New Member

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

what do you mean by EMC ?

Cisco Employee

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

EMC is the vendor who writes the polling engine for DFM.  We OEM the Smarts InCharge engine as the underlying components of DFM.

New Member

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

Thanks Joe.

I will open a case to the TAC.

Richard

New Member

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

Hello Dears all, Hello Joe,

I appologize to update this thread so lately.

I have opened an SR and we finally found that is a bug

Subject:

The DFM 3.2 don't report alarm when a 4500 series power supply is switched off.

The state reported is "OTHER"

The value send back is "6" in the CISCO-ENV-MIB in the snmp protocol.

The bug referenced is CSCtg29656 .

It will be available for details  in few days.

Thanks

Richard

New Member

Re: LMS 3.2 /DFM 3.2.0 - DDV report a unknown status on 45xx ser

Hey Richard

Any news on that? We have the same problem here. All patches and updates installed, but we don't get any Alert in the dfm if a device power supply fails... Happens with 4500 and 6500, it worked once...

regards

Stefan

713
Views
0
Helpful
13
Replies