Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.2 discovery problem

Hi

I am doing a POC at one of the customer location for LMS 3.2

Now the problem i am fcaing is that when i have enabled the discovery based on CDP i am only able to discover two to 3 cisoc device only.

The customer has around 75 cisco devices including routers.

Its is not able to discovers the MPLS router across WAN however it is discovering the router where peer to peer link is there.

Am i missing something

I have enabled CDP in all the devices but still it is not able to discover the devoves.

I am using the evaluation version.

Thanks

3 REPLIES
Cisco Employee

Re: LMS 3.2 discovery problem

CDP typically does not work across MPLS.  If you want all of the MPLS devices to be found, you will either need to use a non-CDP protocol, or configure seed devices on all ends of the MPLS cloud.

New Member

Re: LMS 3.2 discovery problem

Hi

Thanks for your reply

But i have also tried to use the icmp but still the problem is there

Also plz let me know whether FW will get discovered with that or not.

Thanks

Cisco Employee

Re: LMS 3.2 discovery problem

Make sure the SNMP credentials you have configured in Discovery are the correct ones, and that the LMS server is capable of polling these missing devices with SNMP.  You can use a sniffer trace filtering on udp/161 traffic to see what Discovery is sending, and whether or not the devices are replying correctly.

Yes, Discovery will pick up firewalls with the ICMP module provided the firewall allows LMS to ping it, and poll it with SNMP.

360
Views
0
Helpful
3
Replies