Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.2 dmtgd Startup Error

Running on a Windows 2008 (with SP1) system.  The system was running properly until someone tried to run a script they had been using on the previous LMS 3.1 system.  Now the daemon manager will not start, and the dmgrDBg.log file has the following entries:

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgrDbg] getenv(PX_MY_TRACE)=[1]

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgrDbg] getenv(PX_DBG_LEVEL)=[1]

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgr-debug]Is this starting the startup service

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgr-debug]CRMDmgtdService::Run

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main] ENTER; argc=1.

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main] argv[0]=[CRMDmgtd]

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main] will daemon_init().

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::daemon_init] ENTER.

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::daemon_init] RETURN 0 (OK).

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main] done daemon_init().

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main] progName=[CRMDmgtd].

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main] will new CatLogMsg(SYSLOG).

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main] done new CatLogMsg(SYSLOG).

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main]; will new CStartup().

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main]; done new CStartup().

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main]; <NT> will theStartup->CreateUserToken().

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main]; <NT> ERROR >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main]; <NT> CreateUserToken() failed; lastError=0x00000569.

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main]; <NT> CreateUserToken() failed; log msg#2507.

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::cleanUp] ENTER.

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::cleanUp] will delete theStartup.

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::cleanUp] will delete theLog.

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::cleanUp] RETURN void.

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgrDbg][dmgtd.cpp::main]; <NT> CreateUserToken() failed; RETURN EXIT_FAILURE=1.

[Tue Dec 08 09:00:03 W. Europe Standard Time 2009][dmgr-debug]Is service stopped

Short of rebuilding the system from scratch, how can I identify what is wrong and how to fix it..?

Cheers,

SRGi

2 REPLIES
Cisco Employee

Re: LMS 3.2 dmtgd Startup Error

What does this script do?  You might try running NMSROOT/setup/support/resetCasuser.exe to reset the casuser password and security settings.

New Member

Re: LMS 3.2 dmtgd Startup Error

The issue was not the password, but the security settings.  It seems someone decided to remove the assignment "Log on as a batch job" from the CASUSER rights...  The script itself is a simple perl script that calls DCRCLI to perform additions or deletions...

576
Views
0
Helpful
2
Replies
CreatePlease to create content