Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LMS 3.2 Inventory Collection failing

Inventory collection is failing for some devices. I ran into this on 3.1 but thought issue was supposed to be fixed in 3.2 I'm attaching IC_Server.log. An example device is 10.69.130.57

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: LMS 3.2 Inventory Collection failing

Then go higher. Make sure you're actually applying the changes.

4 REPLIES
Cisco Employee

Re: LMS 3.2 Inventory Collection failing

Go to RME > Devices > Device Management > RME Devices, and edit the device attributes for this device. Set the SNMP timeout to 10, save your changes, then inventory collection will work.

New Member

Re: LMS 3.2 Inventory Collection failing

I increased the SNMP timeout to 10 but still have the same problem. New IC_Server.log attached.

Cisco Employee

Re: LMS 3.2 Inventory Collection failing

Then go higher. Make sure you're actually applying the changes.

New Member

Re: LMS 3.2 Inventory Collection failing

I was not appying. I was hitting Modify button, but not Apply button in parent window. It's working now at 10 second timeout. Thanks.

145
Views
0
Helpful
4
Replies