Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

LMS 3.2 - No inventory for WS-C2950-24

Hi,

I have a problem to get inventory data from WS-C2950-24 switches.

SNMP RO+RW is available and telnet, too.

But I get the failure "Device sensed, but collection failed".

I checked the device package, it is "Cat2900XL" its version is 4.0.

Is that the right package for the device with the newest version?

Thanks for any advice!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: LMS 3.2 - No inventory for WS-C2950-24

Yep, that's the problem. You need to have all 2950s on 12.1(11)EA1 or higher. All 3550s need to be running 12.1(19)EA1 or higher. This is due to bugs in the switches' ENTITY-MIB implementations.

4 REPLIES
Cisco Employee

Re: LMS 3.2 - No inventory for WS-C2950-24

This sounds like a known bug with the software version on the 2950. What version of code is it running?

Bronze

Re: LMS 3.2 - No inventory for WS-C2950-24

I didn't look to every of the 60 switches.

But on some of them the version

c2950-i6q4l2-mz.121-6.EA2c.bin

is installed.

Cisco Employee

Re: LMS 3.2 - No inventory for WS-C2950-24

Yep, that's the problem. You need to have all 2950s on 12.1(11)EA1 or higher. All 3550s need to be running 12.1(19)EA1 or higher. This is due to bugs in the switches' ENTITY-MIB implementations.

Bronze

Re: LMS 3.2 - No inventory for WS-C2950-24

Thanks Joe! Great support :-)

I will look for updating the devices.

211
Views
4
Helpful
4
Replies
CreatePlease to create content