I am setting up a cisco 3750 with aaa authentication along with a username and password for local access. I just realized that my LMS will fail when performing a sync archive. Reason for failure is TELNET: Failed to establish TELNET connection to xxx.xxx.xxx.xxx - Cause: Authentication failed on device 3 times. This work previously when I had telnet configured for access. Does anyone know what I am missing. I plan to deploy aaa authentication to all my cisco devices. TIA
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...