09-01-2010 03:06 AM
Hello,
I notice some discrepances in topology services. For example, hsee-dcn-rack31 (port 1/47) is connect to hsee-dcn-core1 (port 6/37) but the topology services show the port is 6/36. I attach topology services screenshot and cdp command outputs.
What could be the problem?
Thanks
Solved! Go to Solution.
09-12-2010 01:47 AM
Delete them from Topology Services, then perform a new, full Data Collection.
09-01-2010 09:40 PM
Nothing was attached. Was the switch ever connected on port 6/36?
09-02-2010 12:09 AM
09-02-2010 10:41 PM
What about the answer to my question? Was this switch ever connected on 6/36?
09-03-2010 01:55 AM
No, this switch has never been connected on 6/36
09-05-2010 12:21 AM
Post SNMP Walks of the cdpCacheTable and ifTable from both devices.
09-06-2010 02:51 AM
09-06-2010 12:21 PM
This checks out. My theory is that Data Collection is not completing properly. Run a new Campus Data Collection, then post the ani.log.
09-07-2010 06:45 AM
09-07-2010 09:39 PM
Data Collection seems to be completing. Delete these two switches from the Campus map, then run a new Data Collection. See if the proper CDP relationship shows up.
09-08-2010 08:52 AM
Do I have to delete the devices from this menu ( Admin Data Collection Device Management Exclude Devices) or from topology services map?
thanks
09-12-2010 01:47 AM
Delete them from Topology Services, then perform a new, full Data Collection.
09-13-2010 03:16 AM
I deleted them from campus manager and that fix the problem thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide