The upgrade from LMS 3.2 to 4.x is not free. Even with Smartnet support, LMS major release upgrades are not included. You will need to purchase an upgrade. The product number depends on how many devices you are managing. Please refer to Table 6 in the product bulletin for details.
Once you have the upgrade media and new license key, you will need to follow the procedure for backing up your existing data, installing LMS 4.1 and then restoring your data onto the new installation.
As always, be very careful to follow installation procedures exactly. LMS has a lot of components and dependencies. If the installation prerequisites are not met or anything is done incorrectly, you may end up with an unsuccessful installation that is difficult to troubleshoot.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...