Each DVD comes with its own serial number, but the license used by 3.1 is the same as the one used by 3.2. There is no need to get a new license. LMS 3.2 can simply be installed over an existing 3.1, or as a new installation using the existing 3.x license.
This is exactly that same thing I said in my last post. While each DVD comes with its own serial number, the license is not bound to any host or to any version. An LMS 3.0 license can be used to activate a copy of LMS 3.2 on any machine. You just need to make sure you have one unique license per installed copy of LMS.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...