Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.2 User Tracking 10GE trunk to HP BladeSystem c7000 w. Virtual Connect Flex10

Hi All,

situation:

LMS 3.2

Cat6509 w. 4 port 10 GE module connected with trunk to

HP BladeSystem c7000 Enclosure

with

HP Virtual Connect Flex-10 10Gb Ethernet Module

with

#20 of ESX servers, Citrix

UT settings: "config trunk for end host disc. = enable on this trunk."

No show for connected MAC's of the server and end hosts (Citrix sessions).

Note: this works well for a ESX based DL380 server connected with 1GB trunk to a C3750.

Why is this not working for this Cat6509 configuration ?

Is the 10 GE port supported in Campus manager?

regards,

4 REPLIES
Cisco Employee

Re: LMS 3.2 User Tracking 10GE trunk to HP BladeSystem c7000 w.

Are you doing channeling across these links?  Channeling is not supported yet for UT acquisition.

New Member

Re: LMS 3.2 User Tracking 10GE trunk to HP BladeSystem c7000 w.

Hi Joseph,

Long time ago I started this discussion about UT support for portchannels. Right now we're on the level of LMS 4.2, do you know if there is any progress made with support for UT on portchannels?

Kind regards

Ad

Cisco Employee

Re: LMS 3.2 User Tracking 10GE trunk to HP BladeSystem c7000 w.

Channel support is there in LMS 3.2.1 (i.e., the latest consolidated patch for LMS 3.2).  This will be Campus Manager 5.2.2.  This was also rolled into LMS 4.0.1, so it's in 4.2.

New Member

Re: LMS 3.2 User Tracking 10GE trunk to HP BladeSystem c7000 w.

Hi Joseph,

Thank you for this quick answer.

Still we have troubles to get this working, can we debug this?

Which debug option do we have to enable?

kind regards

Ad

965
Views
0
Helpful
4
Replies