Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.2 vlan configuration

Hi,

I have some port to configure to have a vlan + a voice vlan. How can i do that using LMS 3.2 ?

I have check the vlan port assignement but i haven't seen a option to define 2 vlan.

typically our port are configure like this one

interface FastEthernet0/1/1
switchport access vlan 2
switchport voice vlan 100
macro description cisco-phone | cisco-phone
spanning-tree portfast

and i wish to use LMS to configure new port.

Cheers

Everyone's tags (5)
7 REPLIES
Cisco Employee

Re: LMS 3.2 vlan configuration

You can use Netconfig in RME to do what you want.  RME 4.3 has port-based Netconfig functionality which will greatly facilitate what you want to do.  Just create a new Netconfig port-based job, and create a new Adhoc task to specify the configuration you require.

New Member

Re: LMS 3.2 vlan configuration

Is there really no way to do it using a GUI ?

How should i simply wish interface i wish to configure ?

Cisco Employee

Re: LMS 3.2 vlan configuration

Netconfig is all GUI-based.  I don't understand the question.

New Member

Re: LMS 3.2 vlan configuration

What i mean is that can i have a gui that let me choose which vlan

i wish to add to port ?

we have different voice vlan and different data vlan, can i have a gui that let me choose one of the data vlan and optionnaly a voice vlan ?

i don't understand how to do that

Cisco Employee

Re: LMS 3.2 vlan configuration

This feature is not available on Campus yet, and there isn't another GUI in LMS which will provide this.  I have opened a feature request, CSCtf51757, but you should talk to your account team to get them to push things from the business side as well.

--

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com

New Member

Re: LMS 3.2 vlan configuration

Hi,

thanks for this request from your part.

In order to be able to configure the port of my switch with my configuration VLAN voice + VLAN data, how do i must use the netconfig tool ?

Can you help me creating the right job that eventually let me enter the port of the switch as a variable ?$

Regards

Cisco Employee

Re: LMS 3.2 vlan configuration

I think what might be easiest is to go to RME > Config Mgmt > Netconfig > Netconfig Jobs, and create a new Port-based job.  Then, define an ad-hoc rule to match the port or ports you want.  For example:

Port.PortName equals Fa0/3

Then, create an Adhoc Task which defines the VLAN values that you require.

946
Views
0
Helpful
7
Replies