Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.2 with HUM

Hi,

We have installed CW 3.2 and trying to download images from either

cisco.com or the file system into the software repository. We can add all router and

switch IOS images but none of the ROMMON images.

Can we use CW to upgrade a router or switch ROMMON?

6 REPLIES
Cisco Employee

Re: LMS 3.2 with HUM

What are the images you are trying to download?

New Member

Re: LMS 3.2 with HUM

Hi,

Here is an example of Rommon Image in the screenshot.

Please see the attachment.

Thanks.

Cisco Employee

Re: LMS 3.2 with HUM

No, these images are not supported by RME. You must upgrade the ROMMON code by hand.

New Member

Re: LMS 3.2 with HUM

Hi jclarke,

Thanks for the reply.

So is there a document or list to tell which kind of rommon images are supported.

Can we do it by Netconfig Jobs in RME?

Thanks

Cisco Employee

Re: LMS 3.2 with HUM

Bootloader images are supported. For example, c7200-boot-mz.120-24.S6.bin.

Yes, Netconfig may be a viable workaround. You can create an ad hoc job to call the upgrade rom-monitor command. Of course, this will be interactive, so your job will need to be something like:

upgrade rom-monitor file FILEy

That said, the job will reload the router at this point, and will fail. The router will most likely be stuck at the rommon> prompt requiring console interaction to complete the boot after the upgrade completes. This may be unacceptable, and thus a local console upgrade outside of RME should be done.

New Member

Re: LMS 3.2 with HUM

Hi jclarke,

Thanks for the reply.

So is there a document or list to tell which kind of rommon images are supported.

Can we do it by Netconfig Jobs in RME?

Thanks

127
Views
10
Helpful
6
Replies