Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LMS 3.2

Hello clarke,

I have LMS 3.2 product,But i have all HP switches,will it be worth to discover HP switches in LMS,and what feature's will be available for HP switches from LMS.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: LMS 3.2

No, software and config management cannot be done.  You can bring up Device Center, but the device will only have very generic options (e.g. ping, traceroute, SNMP Walk, etc.).

5 REPLIES
Cisco Employee

Re: LMS 3.2

LMS is designed to manage Cisco devices.  You will not get much value for non-Cisco equipment.  RME will be able to do some basic MIB-II inventory collection, and you can setup pollers in the Health and Utilization Monitor add-on, but that's about it.  Those HP devices will also count against your license, so it's best to not add them to the various LMS applications.

--

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com

New Member

Re: LMS 3.2

Hello Clarke,

RME will be able to do some basic MIB-II inventory collection ????

what is MIB-II inventory collection??

I don't have a HUM included in that it is not extension only the base model.

Thanks for kind reply.

Cisco Employee

Re: LMS 3.2

MIB-II collection is the system branch and the ifTable.  You will not get asset details like serial numbers, memory information, file system info, etc.  Yes, HUM is an add-on which requires a separate license.

--

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com

New Member

Re: LMS 3.2

Thanks clarke,

Can i  do software deployment,config deployment,use of device centre,vlan configurtion ??????    OR just what u have mentioned above.

Thanks once again for ur prompt reply

Cisco Employee

Re: LMS 3.2

No, software and config management cannot be done.  You can bring up Device Center, but the device will only have very generic options (e.g. ping, traceroute, SNMP Walk, etc.).

261
Views
0
Helpful
5
Replies
CreatePlease login to create content