Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

LMS 4.0.1 ani log file too large

My LMS 4.0.1 platform is installed since several days and I have a very large ani.log file (> 300 MB after 4 days of daemons running).

In this file, I saw many Ani Discovery errors or warnings like for example:

2011/11/28 11:08:46 Discovery ani WARNING DcrpSMFUDLDDisabledOnPorts: Unable to fetch device details for container(Device,10.11.101.241 hostname: 10.11.101.241)

2011/11/28 11:08:46 Discovery ani WARNING DcrpSMFUDLDDisabledOnPorts: Unable to fetch device details for container(Device,10.74.101.245 hostname: 10.74.101.245)

2011/11/28 11:08:46 Discovery ani ERROR DcrpSMFPortBPDUFilterDisabled: Unable to get span tree device info for the devicecontainer(Device,10.14.101.5 hostname: 10.14.101.5)

2011/11/28 11:08:46 Discovery ani ERROR DcrpSMFPortBPDUFilterDisabled: Unable to get span tree device info for the devicecontainer(Device,10.3.101.12 hostname: 10.3.101.12)

....

2011/11/28 11:18:45  Discovery ani WARNING DcrpSMFCDPAccessPort: Unable to get CDP information for  the devicecontainer(Device,10.1.101.17 hostname: 10.1.101.17)

2011/11/28  11:18:45 Discovery ani WARNING DcrpSMFCDPAccessPort: Unable to get CDP  information for the devicecontainer(Device,10.1.101.9 hostname:  10.1.101.9)
2011/11/28 11:18:45 Discovery ani WARNING DcrpSMFSTPBackboneFast:  Unable to get span tree device info for the devicecontainer(Device,10.1.101.85  hostname: 10.1.101.85)
2011/11/28 11:18:45 Discovery ani WARNING  DcrpSMFSTPBackboneFast: Unable to get span tree device info for the  devicecontainer(Device,192.168.12.51 hostname:  192.168.12.51)
...

2011/11/28 11:25:11 EvalTask-background-41 ani ERROR StpSMFGetStpInstance: unable to get stp device information

These errors are not focused on specific devices (many devices are concerned).

However, all seems to be working fine on the platform (layer2 maps, data collection, inventory, config backup, UT, DFM, ...).
For informations, recently, I was in contact with TAC because Data Collection was always in running state.
They provided a new PortDetailsXml.class file to replace the original one.
It has fixed the problem.
I suspect now that ani database could be corrupted and need to be reinitialized.
I would to be sure of that and if possible to avoid this solution.
Thanks for your help.

590
Views
0
Helpful
0
Replies
CreatePlease to create content